I have a 2002 Peterbilt 379. Truck will start and run with no problem. I have no power to the ACC side of the truck. I have not heat, wipers, power mirror, ect. Anyone have any ideas as to why or where to look. I have checked the fuses under the dash. I am lost and could use some help. Thank you.
Peterbilt Power Issue
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by snidertrucking4, Jan 6, 2018.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The Main Accessory Relay in the dash is where I'd start. It's on the left side usually above the fuse panel in the key switch area. It is a large 75 amp relay, part # 16-03405. Key accessory power activates it to power up all the accessory fuses.
bigguns, Oxbow, maggard359 and 2 others Thank this. -
I wish I could point you to a more specific place but this is kinda strange that NOTHING is working. Tells me it's gotta be a major wire or a harness plug or something.Oxbow Thanks this. -
You can change it, just hard to reach, probably loose a little skin but that is where you problem is -
-
Ok found the big relay. Used a jumper wire and got everything to work but my cab heater
-
Hope it is a big wire, keep the fire extinguisher handy
bigguns Thanks this. -
Yes it was a big wire just used it to test the relay. Got the new relay in and everything seems to work
GrapeApe Thanks this. -
How much skin did you scrape off?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2