Dropping neck on mechanical DD
Discussion in 'Heavy Haul Trucking Forum' started by nikmirbre, Jan 23, 2018.
Page 5 of 20
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Yes, THAT lever. That retracts the dowels. Like @johndeere4020 and others have said, drop the trailer, take pressure off the dowels, then step on the lever to retract the pins, then you back back under the trailer lifting the neck.Last edited: Jan 24, 2018
-
Yes its dumped.
Thats correct...its off the ground anytime I back under it -
See this lever, you need to roll this back. It pulls the dowels in. Sometimes they are very stiff. Stand on that lever or get something for leverage to move it. You will not get the neck off if these are not retracted
Last edited: Jan 24, 2018
-
Ok they retracted!!!!!!! Now pin is pulled and I'm ready to drive out from under it.....do I reinflate my suspension BEFORE I start to drive out from under it? The 4x4 is in place behind 5th wheel
-
Only question is do I go ahead and unhook my airlines from the neck to the deck( I know if I dont they're gonna rip...but, do I at least start to pull forward a lil bit. Cause taking the air off will cause the pin to re-engage
-
So you have the neck kingpin locked back into the fifthwheel and the 4x4 is between the top of your frame and the neck, right?Last edited: Jan 24, 2018
johndeere4020 Thanks this. -
-
Unhook them. The lock cylinder gets it's air from the red air line on your tractornikmirbre Thanks this.
-
Air your bags up and pull away if your neck pin is unlocked.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 5 of 20