New or old asked again
Discussion in 'Ask An Owner Operator' started by Tug Toy, Aug 30, 2015.
Page 33 of 77
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
@RStewart @Lepton1
I've used Deshields Truck Service on Exchange east of Agnew the frame and alignment shop is on the south side of the road, body shop on the north. If you take it there you'll have to bobtail as well unless your just visiting for a few minutes then you can park on the south side of the street which is plenty wide you'll just be blocking most of their drive.singlescrewshaker, Lepton1, RStewart and 1 other person Thank this. -
Slowpoke KW and Oxbow Thank this.
-
The coolant tank finally gave up. IT looked rough when I did the engine but wasn’t leaking so I rolled with it. New OEM tank, brackets and straps $650 delivered. About 2 1/2 hours to complete and an extra gallon of coolant.
Only required the simplest of hand tools and a clean 5 gal bucket.singlescrewshaker, Ruthless, HopeOverMope and 7 others Thank this. -
So far this year I’m at $89k on 29k miles. Coming up on a year on the new motor. I’m taking next week off to get the truck cleaned and polished up. I’m going to pull the valve cover and do the overhead. My truck is telling me it’s time to stop for a week. Last couple of days I ripped a tread off a trailer tire ( my fault) had another tail lite failure and blew an airbag. I got a thousand other little things that need attention all the way around.
So after getting this coming week compleate it’s going in the shop.Last edited: Apr 23, 2018
singlescrewshaker, Ruthless, HopeOverMope and 3 others Thank this. -
singlescrewshaker, Tug Toy and Oxbow Thank this.
-
A complete remanufactured 10 speed costs about $3500 exchange, how on earth is a range syncro going to cost $13,000 to fix?
Never mind, I just realized the 13k was the cost of the truck; sounds like a good buy to me.Rideandrepair and Tug Toy Thank this. -
Took the week off. Before and after pictures.
singlescrewshaker, Ruthless, HopeOverMope and 3 others Thank this. -
More
singlescrewshaker, shogun, Ruthless and 2 others Thank this. -
After
A few more. This tank didn’t come as clean as I had hoped but it’ll pass.
BeforeThese steps were out of the local scrap pile. They look better and the quality is way better than anything you can get new nowadays. They are in rough shape but cleaned up ok. Definitely not new though. One done and one ready for sanding and polishing.
Last edited: May 3, 2018
singlescrewshaker, Ruthless, HopeOverMope and 1 other person Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 33 of 77