Dropping neck on mechanical DD

Ok problem solved!!!! I adjusted my ride height with the leveling valve..... my question is... does this bolt thing come off??? If I can’t get it off and put it in the next hole down I can get a lower ride height... which I what I want. I’m roughly 22-23 inches from ground to deck on the rear.

 

I mean 22-23 inches from ground to deck at the rear of the well..... not the back deck

 

I wish it was that easy lol..... that thing is hard to get off!! I try holding one side with plyers and turning the nut....

 

Highest point here I’m about 13’8. Only scale I’ve gotta hit is the one at Tennessee/Alabama on 65..... if I can get that nut off I can get it about 3 inches lower

 

Yea I had a ratchet on the nut .... that other side opposite of the nut I just couldn’t get to stop turning. Yes I’m gonna get a universal leveling rod when I get home. It’d be much easier than fooling with this......

 

Btw the thing on the other side of the nut is round .... not stripped or anything it’s just round. So no wrench to put on there