Cracked frame!!!

Discussion in 'Kenworth Forum' started by jotz007, Apr 23, 2018.

  1. jotz007

    jotz007 Bobtail Member

    25
    7
    Jul 31, 2011
    Toronto, Ontario
    0
    Yes. They did weld it before plating it. Motor mount was right next to the crack, so didn't have much room inside.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Diesel Dave

    Diesel Dave Last Few of the OUTLAWS

    9,294
    29,848
    Jan 20, 2010
    Hesperia, Ca.
    0
    How long is the sleeve they put on ?
     
  4. jotz007

    jotz007 Bobtail Member

    25
    7
    Jul 31, 2011
    Toronto, Ontario
    0
    About a foot long, 6inches each side of the crack..
     
  5. Diesel Dave

    Diesel Dave Last Few of the OUTLAWS

    9,294
    29,848
    Jan 20, 2010
    Hesperia, Ca.
    0
    Well...... long as your satisfied with the work but my crack on my frame wasn’t as bad as yours and they added a 6 foot inner frame rail inside. Just keep an eye on it. I have the truck parked, I will take pictures tomorrow and post.
     
    daf105paccar and jotz007 Thank this.
  6. daf105paccar

    daf105paccar Road Train Member

    6,564
    7,293
    Apr 15, 2012
    0
    Oops.:eek::(:(
     
    Diesel Dave Thanks this.
  7. Diesel Dave

    Diesel Dave Last Few of the OUTLAWS

    9,294
    29,848
    Jan 20, 2010
    Hesperia, Ca.
    0
    642FC93C-E26D-4D14-A1B9-CD3DBE909B39.jpeg EDA56714-7C53-4A01-A8E9-A58B8FF604B7.jpeg B00576A1-BD5A-46B8-856A-557F248FE0AC.jpeg A4257421-5F40-4D3A-9C75-B5E2A81E183A.jpeg As I was taking pictures, just realize the inner frame channel that sleeved it is 8 feet long. It goes beyond the motor mount and way back beyond the center hanger of the rear suspension.
     
    Vampire, Ruthless and Expeditor Thank this.
  8. Diesel Dave

    Diesel Dave Last Few of the OUTLAWS

    9,294
    29,848
    Jan 20, 2010
    Hesperia, Ca.
    0
    When I bought this truck in 84(my second truck) I noticed small inner channel plate in the inside of the frame. Well I didn’t realize it was there cause it had a cracked already. It was sort of hidden. Anyways..... 6 months later I noticed th cracked and had realize why the plate was there. As you can see on the above pictures, I had it repaired correctly when I had it done.
    To the OP...... that small piece they repaired your cracked frame, reminds me of my original one. Beware....... it’s not going to last if you haul heavy. Btw, my K100 has been parked for 11 years. I still have it. Can’t seem to part from it. But it’s all intact.
     
  9. jotz007

    jotz007 Bobtail Member

    25
    7
    Jul 31, 2011
    Toronto, Ontario
    0
    Thanks! I am taking the truck back to the shop who did it. Try to get inner plate inserted.
     
  10. Aces-N-Eights

    Aces-N-Eights Light Load Member

    135
    200
    Feb 21, 2018
    Mobile, AL
    0
    Dealing with a rust issue on my W9. Wish I could have gone the sleeve route... Wound up transplanting truck onto two new entire frame rails. Wallet still hurts, BUT won't deal with this again in my lifetime!!
     
  11. jotz007

    jotz007 Bobtail Member

    25
    7
    Jul 31, 2011
    Toronto, Ontario
    0
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.