Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 1037 of 21995
-
7-UP, 4mer trucker, SAR and 8 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Three tires is triplesjohndeere4020, SAR, snowman_w900 and 6 others Thank this.
-
Sounds like you feel like I do after my 20 stops today.
-
Looking fine.

Can I take it for a spin?wore out, Crusader66, Zeviander and 3 others Thank this. -
This must be where the hook "Gimme forty acres and I'll turn this rig around" came fromwore out, 4mer trucker, stwik and 10 others Thank this.
-
The 9300 cornbinder I did flat and lowboy work with needed every bit of that 40 acres to spin around.
Shock Therapy, Zeviander and Oxbow Thank this. -
Question.
Isn’t that what they make those curved rings for?Shock Therapy, snowman_w900, 1951 ford and 1 other person Thank this. -
Tuesday night it was 22°C in Chicago. Now its going down to 1°C tonight in Nairn Centre, ON.
Went from shorts and a sleeveless T-shirt to pants and a regular t-shirt, brrr... I thought we were done with this.
I got a seat on the gravy train this week. Haven't had a long driving day since Monday. Couldn't get to The Soo tonight because I didn't have enough time, but ####, I got barely 11,000 lbs on the deck and haven't cancelled the cruise since leaving Barrie. What a pleasure cruise.
When I went and found the trailer at the shipper, I had to ask if it was fully loaded, because I couldn't believe this was a full order of "structural steel" lol.
Lots of straps and a bit of weaving work but I'll take this to a 65,000 lb load of tarped steel from Harrow. If I went there, I probably wouldn't get home till Sunday.4mer trucker, Shock Therapy, ShooterK2 and 6 others Thank this. -
Those would have been a better choice, but these are what he wanted. These are 5" x 5" instead of 5" x 6". Being 1" shorter, I had to crowd them toward the top of the beam so they'd reach. That made getting a good root pass on the top harder because of bad angles and difficulty seeing what was going on in the groove. The top of both of them got 3 extra passes, the factory put extra passes on the top of the original ones as well.wore out, 4mer trucker, Tug Toy and 12 others Thank this.
-
How many of you know where that is?BigCam9670, Logan76, wore out and 9 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1037 of 21995