I would recommend a product called Nylog.....the fittings you have going on that unit will be flared. Nylog will help prevent vibration from loosening those fittings and your refrigerant from leaking out.
Fighting summer heat.
Discussion in 'Ask An Owner Operator' started by Snailexpress, Jul 7, 2016.
Page 7 of 9
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
2. I have reefer and it need some room to open reefer unit doors without trailer drop.
3 It was easy to install piping
4 compressor noise is away from my head area. -
-
-
@Snailexpress what are the cement ions of the head unit in the cab? I have a Vnl 780 and it has a small cabinet across the top
-
https://www.amazon.com/gp/product/B01DVW6BG0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
28.5x7.5x11.5
If I were to do it again, I would put it up high on the back wall. Mounted to the plywood on the window, it can get too cold sitting at the workstation, and I need a blanket when it's in the bed position.
-
-
-
I was planing to make a mount over the windschield area
and run the pipes true the shelfs on the passanger sideslippynosepete and Sharky88 Thank this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 7 of 9