Coax question

Oh swr dont mean squat if you have high impedences and the ant is not resonate..
Out of all the antenna mesaurements swr is the least important...
K0bg.com or is it kobg.com
Do some reading....

 

If you think you need to firm up the flimsy a lil..Head to a hardware store and look for as small as you can find flexable pvc water pipe..Slide it down over and if still to big shoot a lil of that spray insulation(can stuff)down in it to keep it tight..Only need about a 3 or 4 ft length..Did basically same thing on my 7ft skip shooter on my previous cascadia..

 

Differences in coil height of a skip shooter vs a 10k with shaft extention..

My coil is way up top and his is still only half way up..

 

Lol just take your hat off when you get home.or in the trk..Keep the had next to your gloves..lol

 

Ok...yeah just mount it to the chassie if possible..That would be your ground plain..No clue what pex tub it....I was just useing flexable water pipe cause i dont wanna put to much strain on the mount like i did already..Broke the stud..lol..I used the non flex hd pvc water pipe..Blk stuff...

 

Just useing a stryker 955..Mostly on cb..