International pro star electrical problems

hey guys I’m clinton and am working on a 2012 international pro star, everything was fine yesterday and this morning we went turn the key on and the right side of the cluster is not working properly, the needles jiggle but do not go through there motion, they all stay at 8 o’clock, volts, fuel and both air gauges. The oil temp, oil pressure and rpm gauges work fine, the electric windows don’t work now and the horn or air horn on the steering wheel don’t work either. Electrical fault is showing up on the dash. The check engine light flashes 4 times and then goes away every time you turn the key on. Anyone dealt with this before?

 

Which one is the main power cable? There is two power cable in the center of the cluster module? And how do I check the mega fuse?

 

Now the power mirrors aren’t working, and when I pull out the fuse for the power mirrors the abs light, check engine light and traction controls light come on on the cluster

 

It has 12 volts, somehow the fuse panel for the power mirrors and windows ohms out with one of the plus for the cluster. Top right plug if look over the top of the cluster. Three terminals in that plug ohm to the power mirror and window slots for the fuse panel. When we pull out the power mirror circuit breaker the abs, traction control and check engine light come on on the dash, when we put the circuit break back in they go off