Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Transmission swap

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by ricinindy, Aug 2, 2018.

  1. Aug 2, 2018 #1
    ricinindy

    ricinindy Bobtail Member

    10
    1
    Mar 30, 2011
    Indianapolis, Indiana
    0
    I recently lost the transmission in my 95 Kenworth. Swapped my super 10 to a 13 speed Eaton. Now my speedometer and cruise doesn't work? They tested the wires from the ecm to the speedometer sensor and other sensor and it has power but couldn't test the other side because they needed the wiring diagram.
    I have a 60 series detroit.
    The speedometer does come up between 2 to 5 mph at 55 to 60 mph. So either I have a short/ bad wire or the dip switch settings need changed because of the different transmission? Or maybe the parameters in the ECM need changed? I haven't a clue and it's sitting at Clarke Diesel in Indy now and they have been waiting for 3 day's to hear from Detroit. If anyone has dealt with this issue please help!
     
    ricinindy, Aug 2, 2018
    ricinindy, Aug 2, 2018
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Aug 2, 2018 #2
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,733
    Jan 30, 2010
    keep stroking.
    0
    Did you change the pulse ring behind yoke as well ? If not it may have different spaces between the pulse nubs than what your other trans had or may not even have one on it.
     
    Superhauler, Aug 2, 2018
    Superhauler, Aug 2, 2018
    #2
    Oxbow, Tug Toy, Hulld and 1 other person Thank this.
  4. Aug 2, 2018 #3
    ricinindy

    ricinindy Bobtail Member

    10
    1
    Mar 30, 2011
    Indianapolis, Indiana
    0
    It has a tone ring but whether or not they are the same I have no clue.
     
    ricinindy, Aug 2, 2018
    ricinindy, Aug 2, 2018
    #3
    Oxbow Thanks this.
  5. Aug 2, 2018 #4
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,733
    Jan 30, 2010
    keep stroking.
    0
    Did you adjust the sensor at the correct gap ? I screw mine in till it touches then back it off half turn.
     
    Superhauler, Aug 2, 2018
    Superhauler, Aug 2, 2018
    #4
    Oxbow Thanks this.
  7. Aug 2, 2018 #5
    ricinindy

    ricinindy Bobtail Member

    10
    1
    Mar 30, 2011
    Indianapolis, Indiana
    0
    Yep. Lol.
     
    ricinindy, Aug 2, 2018
    ricinindy, Aug 2, 2018
    #5
  8. Aug 2, 2018 #6
    AModelCat

    AModelCat Road Train Member

    29,470
    162,259
    Jul 7, 2015
    Canuckistan
    0
    Did you re-use the speed sensors off your original super 10 or just plugged in to what was on the 13?
     
    AModelCat, Aug 2, 2018
    AModelCat, Aug 2, 2018
    #6
    Oxbow Thanks this.
  9. Aug 2, 2018 #7
    BoxCarKidd

    BoxCarKidd Road Train Member

    4,535
    6,600
    Aug 26, 2014
    0
    I saw something like that once. The tone ring could be turned with a screwdriver through the sensor hole. Problem solved by tightening yoke nut.
     
    BoxCarKidd, Aug 2, 2018
    BoxCarKidd, Aug 2, 2018
    #7
  10. Aug 14, 2018 #8
    Rideandrepair

    Rideandrepair Road Train Member

    17,471
    56,674
    Aug 8, 2015
    0
    Mine has 2 sensors had to change both odometer quit now I guess I need new speedo.Been broke for 4 yrs!!! Don’t need odometer any more!
     
    Rideandrepair, Aug 14, 2018
    Rideandrepair, Aug 14, 2018
    #8
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.