Is there a way to set the voltage level so that it comes on at a higher voltage. I have an inverter and I can see the voltage, When I'm not running the fan or the air conditioner, the voltage drops so low that it shuts off my peripheral power before the apu comes on. Also, testing my bunk heater, the voltage drops off enough to shut my bunk heater off after 45 minutes and it stays off. Obviously this will be a problem in the winter unless I can adjust the voltage monitoring system in the APU.
Thanks
Anybody that has the new tripac carrier apu 2018
Discussion in 'Schneider' started by kanidana, Sep 12, 2018.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
There's a black usb cord that runs off the black box in your side box.
How access the files is dependent on what OS your running.
I have windows 8.1 and have to go to DEVICES AND PRINTERS to get to the file. Once you get to the files you'll need to know what one to open.
Honestly your better off running by a TK shop and have them show you how.Farmerbob1 and kanidana Thank this. -
If you decide to screw around with it just remember after resetting the voltage you need to click yes/ ok on the pop up for it to set.
It say it going to run a test but it's really just going to confirm your requst.kanidana Thanks this. -
You can do it from control inside cab. Youtube has videos
kanidana Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.