Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

MID 128 SID 231 FM2 error code.. what does it mean and how to fix it??

Discussion in 'Volvo Forum' started by bravoo67, Jun 14, 2012.

Page 4 of 6
  1. Oct 2, 2018 #31
    Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    Thanks
    I just wanna fixed by my self
     
    Val2560, Oct 2, 2018
    Val2560, Oct 2, 2018
    #31
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 4, 2018 #32
    bravoo67

    bravoo67 Light Load Member

    252
    34
    Mar 15, 2012
    Brooklyn NY
    0
    I didnt fix the problem but most likely my injectors was failing, now I have cummins n14 and changed couple injectors on it, can tell that even reman injectors from the dealer can be faulty, had 2 out of 3 bad, take heat gun and check temperature difference between cylinders on the exhaust ports
     
    bravoo67, Oct 4, 2018
    bravoo67, Oct 4, 2018
    #32
  4. Oct 5, 2018 #33
    Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    Ok, thanks
     
    Val2560, Oct 5, 2018
    Val2560, Oct 5, 2018
    #33
  5. Oct 5, 2018 #34
    Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    It’s cranking, but won’t start
     
    Val2560, Oct 5, 2018
    Val2560, Oct 5, 2018
    #34
  7. Oct 6, 2018 #35
    Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    Main is Cummins ISX 400 ST
     
    Val2560, Oct 6, 2018
    Val2560, Oct 6, 2018
    #35
  8. Oct 6, 2018 #36
    Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    It’s Any barry here to help me?
     
    Val2560, Oct 6, 2018
    Val2560, Oct 6, 2018
    #36
  9. Oct 7, 2018 #37
    bravoo67

    bravoo67 Light Load Member

    252
    34
    Mar 15, 2012
    Brooklyn NY
    0
    what happened to the engine since it doesnt start?
    my friend after rebuilding mack engine couldnt get it to start, turned out to be jakebrakes wouldnt let it start because of not enough oil pressure or something
     
    bravoo67, Oct 7, 2018
    bravoo67, Oct 7, 2018
    #37
  10. Oct 7, 2018 #38
    Val2560

    Val2560 Bobtail Member

    12
    0
    Sep 14, 2018
    Elgin
    0
    Was sitting for a long time, I was trying everything, changed a lot of things, still the same
     
    Val2560, Oct 7, 2018
    Val2560, Oct 7, 2018
    #38
  11. Oct 7, 2018 #40
    bravoo67

    bravoo67 Light Load Member

    252
    34
    Mar 15, 2012
    Brooklyn NY
    0
    since its getting electrical code, might be rusted connection wire harness or something else not giving signal to ECM to start engine, do you get power to injectors, u can check it with NOID lights u plug in to injector harness
     
    bravoo67, Oct 7, 2018
    bravoo67, Oct 7, 2018
    #40
  12. Oct 8, 2018 #40
    waltherz

    waltherz Light Load Member

    129
    12
    Dec 12, 2012
    0
    Look at fuse box and locate the ECM fuse, if you don't have power on that fuse, the engine won't start and must check harness from battery to fuse box: wires, connections, etc. I had same code and 1 pin rusted caused not power on the ecm fuse. I hope help.
     
    waltherz, Oct 8, 2018
    waltherz, Oct 8, 2018
    #40
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 4 of 6