Flatbed trailer re-arching
Discussion in 'Flatbed Trucking Forum' started by insanityeight, Oct 11, 2018.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I bet Fontaine could do it. Pretty sure they’re in AlabamaSAR and insanityeight Thank this. -
I don’t know about aluminum, but I’ve re-arched a steel beam trailer.
Flip the trailer over, get a piece of 3/8” thick flat bar, and weld it on the whole length of the main beam bottom flange. The heat of the weld will draw the beams and make a arch. I learned this from a old man that used to build custom heavy haul trailers.Cattleman84 and johndeere4020 Thank this. -
This is exactly how I learned to arch a home made trailer I built several years ago. It works really good for a trailer about 30 feet long... I'm sure it would work same way for a fullsize flatbed.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.