Hey folks, I would appreciate help in identifying these parts on a 02 Mack CV713
Thank you!
Help identifying these parts
Discussion in 'Mack Forum' started by Fredy, Jan 25, 2019.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The top photo is the condenser for the air conditioning and the other one looks like a quick release valve for the air brakes.
-
mslashbar and Diesel Dave Thank this.
-
The first one is the “Dryer” for the air conditioning. The second one is the quick air release valve which is supposed to be mounted. Depending who does your level 1 inspection, but that’s a OOS until mounted.
Bean Jr. Thanks this. -
-
I'm sorry,you're right,it's an accumulater/dryer for the air conditioning system.
Diesel Dave Thanks this. -
Second one is pressure protection valve. It will not allow air out of tank until reaches you 60 or 70 PSI. Common Sealco P/N is 140270.
Tombstone69 and Humblepie Thank this. -
Thank you all for the input. I identified the valve as part:
070-KN31000
Is it supposed to "leak" air because it has a small pinhole size opening that even the new part has as well.
Thanks again -
That pinhole is probably there for a relief when the valve opens and closes.
-
Pressure protection valve - used to isolate aux.air from brake air in case of emergency air loss. Is it in between the two air tanks? I can't see where it's going in the picture.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2