Where is everyone #5

I didn’t know they made a special tool for that like hp I was taught to use long screwdriver. How old is it? Who made it?

 

I know, and the current owner.

 

Ain't no body a probin round my man parts. One slip ruin a fella for life.

As a fixer of things I have seen the look on a customer face when I'm fiddlin around with something then say oh ####. Or where the fawk is that 9/16 wrench. Can you imagine havin to hear that when theys got you by the pubes?

 

Or how many time have you said “ son of a”. Last thing you want to hear while he’s got your scrotum in his hand.

 

We only have 3" so far of the 5 to 8

Going out at 2:30 since it's supposed to end around 3 and get the Snow pushed in off the Highway before the Chuckleheads show up

 

Damtite, I need to replenish this it’s starting to harden up. Used when pouring Babbitt. Used to make a seal / or dam on each side of the bearing to prevent the molten Babbitt from running out on the ground. Wide areas I use thin metal and fill in or caulk with this.

 

Looks like elephant ####

 

That’s a lot of child support

 

The Professional Fragrancy Expert is Grimey. I leave all the explaining on that subject to him. He's much more experienced in that area than probably any other person here.

It's possible that he's fragranted more folks than Rutherfraud. That's a LOT of people !