Where is everyone #5

Unloaded in CHI and reloaded in CHI. Headed out to Owensboro, KY as soon as the other driver gets his load strapped down.

Mine are parked at the bottom. Exactly even with the black stripe around the windshield. Original blades were 16’ but I cut and shortened both arms 3/4’ so I can now fit 20’ blades.

I run the $9 rainx blades from Walmart. Best one I’ve found no mater the price.

But I digress....

Sorry, I’m a bit of a wiper snob.

 

Our 2007 t600 parks in the center with a 2 piece windshield.

 

Its like blue printing a engine. Take the one that flows the most and machine the other 5 to match. Making sure each holds the identical amount of fuel. Then adjusting spray pattern to match. Measuring each orifice and and sizing to match. And some adding orifices say from a 7 hole to a 9 and getting a finer spray with higher volume. Im no mack expert, this is just in general. You can get even more in detail.

 

Out here doin that thing

 

I thought I was the only one that cut my wiper blades down. I buy 18” for my T8 and take about 1.5” off the top. That way the bottom of the wiper sweeps lower on the windshield but doesn’t rub on top. @Ruthless

 

Still haven’t put your chrome on?!

 

Not yet....waiting on it to warm up real good and all the salt to get off the roads. Its getting there slowly but surely tho

And it will be time for lots of polishing!!!

 

Loaded at Enid, bound for Arnett. Word is highway 60 is shut down west of Fairview due to some kind of fire. So we gonna take the high road.

 

My 359 parked in the middle. I learned that the right wiper motor fits the left but parks at the bottom. My 379 is bottom parked both tied together. Electric wipers are the deal no doubt about that.

 

Polishing week currently schedules for the 3 rd week on April