Specifics:
Kenworth T660
Stryker SR-497HPC
Let me preface by saying that I am not new to wiring things up. I'm only (relatively) new to the T660 and how well everything is buttoned up to stay together.
Ok...I've run all new wiring down the driver's side A pillar and was just wondering if there was an easy way to get the hot wire behind the fuse panel. The ground I was planning to run to the body, I just need juice. Batteries are between the frame rails behind the sleeper, so that's a no-go. I'll probably also need to install an inline fuse before the radio. All wires are hidden and it will look clean when complete, just.gotta.get.behind.fuse panel.....
CB hookups in T660
Discussion in 'CB Radio Forum' started by HoneyBadger67, Jul 6, 2019.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Im sure i saw a vid on that..Fella had a white 660.....Surf youtube for that..
HoneyBadger67 Thanks this. -
I found one of the fused 'spare' wires behind the gauge cluster (bless you, paccar) and everything is all hooked up now with a good/decent SWR (1.4). Just getting a lot of electrical interference from ignition and beacons, so that needs sorted out. -
You'll need a long antenna for that truck.
-
Will the longer antenna get rid of some of the LED interference? -
Doubt it..I know some of those seal beam headlight(led) make a TON of noise..
Most likely they are cheap led lights that make the noise...
I have led bulbs in my cascadia from headlight revolution and not a peep from then..
Heck my trucks fridge makes more noise in my radio than anything and to hear that it has to be dead quiet just to hear it kick in.HoneyBadger67 Thanks this. -
My beacons have a staccato rhythm to them and the headlights are so noisy I may as well not have the radio on. Being a 'baller on a budget' I did get inexpensive lights, not knowing about LED RF interference.
-
I dont know if better or more electrical grounding would help....Gotta be solutions cause of over size,military ect have radios and interference...
Maybe ask a few good shops or stick yer nose in google's butt and see if anything helps..HoneyBadger67 Thanks this. -
HoneyBadger67 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.