Well you have no idea what your talking about. We have all bull sheet some. This I ain't kidding about and he was what most will never be, including myself as a steel hauler. Go back to your comfy protected company job and let some of us work. Get it that he was not a bull sheeter and I ain't about to bull sheet Bout his reputation.
Make this a know fact bud!
Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 9803 of 20348
-
PoleCrusher, Zeviander, beastr123 and 2 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
PoleCrusher, cke, shogun and 6 others Thank this.
-
What you choose to believe is up to you.tony97905, PoleCrusher, cke and 13 others Thank this. -
Al. Roper, PoleCrusher, cke and 11 others Thank this.
-
-
You might be able to set it up drive heavy so the steers are light then push it to lighten the drives which would make you heavy on the steers as the drives went over then ease off it again so its light as the pusher rolls over then push on it so it lightens up the tandems after the pushers off the plate. That's alot of air movement and really fast adjustments youd have to make. The pusher would need to be set up on 2 switches. One to dump air and the other to actually lift the axle, otherwise youd be picking up and setting down axles while rolling across and get caught.
And youd just need an air hose with a glad hand on one end and a siphon gun on the other. Or a fairly good size water tank and an equally as large air tank and just fill the water tank and pressurize it with the air and run a wand off that. Siphon gun is more feasible for small clean up jobs.
Al. Roper, PoleCrusher, cke and 10 others Thank this. -
How the F did Andrew Luck just retire from the NFL?
-
@rank QR-1 valve with threaded exhaust port. Plug one delivery port. Thread the delivery port on to top of bag. Screw muffler onto exhaust. Then wire a N/O solenoid air over electric on the line to the back. Exact idea people use for a dump axle for turning but mucho quicker.
1951 ford, PoleCrusher, cke and 5 others Thank this. -
I’ll let it slide for Wore though. He hauls the beef. He may know some #### about eating them that I haven’t discovered yet.
He also hasn’t ever picked wrong for a place of food thus far. Can’t remember where the #### I was but dang it was some great counter serve BBQ.
Al. Roper, 1951 ford, PoleCrusher and 15 others Thank this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 9803 of 20348