Have to change settings in two places, not just cruise control. Just like setting top speed.
Strange problem. Cruise will not set with headlights on.
Discussion in 'Freightliner Forum' started by mitrucker, Aug 29, 2019.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
-
-
Found this on Detroit forum. It'll help your guy to find the parameters.
Two parameters are required to make it work, one for the SamCab (source address 33) to send the message to interrupt cruise when wipers/headlights/etc on. The other is the CPC to watch for the cruise interrupt signal from the module, change CC Pause Switch from "Ccvs3" TO "Ccvs2 or Ccvs3." Screenshot of your vin server config attached.
By default the Cpc is watching from Ccvs3 (SA49 which is your MSF/ steering controls cruise switches) and not watching for a signal from the SamCab 33.
mhyn, QUALITYTRUCK, mitrucker and 1 other person Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2