I only use straps with chains on end. I loop the rub rail, but always catch the d ring on my rail with chain.
I won’t trust it completely
The Truckers’ Report flatbed Hall of Shame.
Discussion in 'Flatbed Trucking Forum' started by MACK E-6, Dec 11, 2017.
Page 203 of 985
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
That’s why I’d peel that sticker.
-
Since I haven't pulled a deck since before a lot of you were born, I got a question. Aren't tiedown points msrked with WLL since the new securement rules came out? And how's that work on older equipment?
-
I agree. Unless the manufacturer barely welded the rail in place (and I see full welds) the rub rails are a perfectly good securement point for straps. Many aluminum trailers those are the only place to hook to.cke, Tug Toy, johndeere4020 and 1 other person Thank this.
-
ChaoSS is right, tie downs aren’t required to be rated.
that’s easy to deal with.stwik, RollinThunderVet, cke and 4 others Thank this. -
My Reitnouer has a label that says my rub rails are good for 5500 lbs.
HuhPoleCrusher, stwik, cke and 7 others Thank this. -
As long as your rub rail are sufficiently rated, go for it. Personally, unless I must go outside the rub rail on an over width load I always go inside the rub rail. It only makes sense, based on the rare but possible event that you OR someone else rubs down that rail.Big John Classic HQ, Tb0n3 and D.Tibbitt Thank this.
-
Where would you have me hook my straps?
It’s only the metal part on the outside most of the time? Still not sure where else I would run my flat hooks too?
I’m all ears if there is a better way? -
I've pulled a variety of trailers. On the Utility I sold a few months ago the j-hooks could attach to a rail just past the winch rails. Other trailers it was a head scratcher. There were a few power only loads I hauled where the only attachment points were on the rub rail (steel instead of aluminum) or you had to go all the way to the frame. That Utility was a good design.
I now work at Teresi. No j-hooks. All straps have a sewn loop. Just past the winches are a series of hooks rated at 7000 lbs to hook the loop. I go through the rub rail to get to the hook, unless it's over width.Big John Classic HQ, cke, Tug Toy and 1 other person Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 203 of 985