Where is everyone #5

They all have oil in them of the 2 I can actually see. With number to unplugged it doesnt change idle immediately like it does with 1 or 6 unplugged but it does start smoking then start idling worse. Acting alot like it does when I first start it in the mornings and it hiccups a little. Going to run to town and grab a couple fuel filters and change it and see what that does to it first. If that doesnt fix it it's time to start unbolting things to get access to the passthroughs and the harness.

 

Most fellas look at me sideways when I say I always soak manifold bolts with brake fluid before I even think about touching them....alot of people have good luck with the wax trick.... I've never needed to do it personally.

If they're stainless like wore said to drill them you have to peck drill at .020 at a time and keep your tool cool.

Carbide will get it but use lot's of soap and don't break it off in the hole or you'll be buying a electricfide blaster to get it out.

 

Thanks , I might give that a try......Didn't think those Burr stones Would eat away at it... ..

Good Idea though

 

Now that it has been heated it is that much more difficult?

 

Usually a little heat and a left hand bit will do the trick... should a mentioned that before.

 

Not if it's stainless

 

Yep- Seems like it made it even more difficult....

Im gonna try the burr stones and a pencil grinder- Then the left habnded bits.....

Sorry Hurricane- Those Carbide Bits and Diamond Bits are out of my Budget at this time $150 a piece

 

Get you a couple of these


It takes time but they usually do the trick

 

Guess I should read ahead, huh?

 

Good god, Shooter... you really need to turn those fans off.

I haven't touched a "shoot em' up" game in years... BF3 was the last I remember. I've played the modern Far Cry's up to Primal... however, I could drink and play The Witcher just about all day. It's the only game I still have on the PC at home...