I have a mechanical gooseneck semi trailer and I am wondering. I had some issues with driveline on one of my trucks, which may be totally unrelated, but it made me think. When I use the truck to pick up the trailer, I have to kind of slam it backwards into the trailer, and when I do it, does the driveline experience too much stress?
Are MECHANICAL GOOSENECKS bad for driveline when you hook up?
Discussion in 'Heavy Haul Trucking Forum' started by ichudov, Nov 16, 2019.
Page 1 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I wish I could tell you...
I always wondered how one of those works though. -
You mentioned "slamming it" so ill assume you don't have ramps on the back of your 5th wheel? I don't know how it does for your driveline but the constantly slamming when backing under a loaded RGN can't be good for your 5th wheel....
-
I have ramps on mine, and when its loaded, the truck doesnt want to pick the trailer up. You have to give it a little fuel and try to ease under it, but once it lifts, it shoots backwards quickly. You obviously try not to slam it, but it does seem to happen more often than not that you do slam it.
-
What kind of driveline issues?
Oxbow Thanks this. -
Post a picture of your ramps. Side view, frame height.
-
A picture of the ramps would help
-
I built my pickup ramps,so it's a nice steady incline until the rollers hit your 5th wheel. Use your lowest reverse gear. Deep reduction low reverse on my 15 speed while picking my RGN up,smooth and steady,never had any driveline issues. Keep the bearings in your pickup rollers greased also,make sure they spin smooth.
-
I do have ramps on the truck and rollers on the gooseneck neck.
-
Interaxle differential broke at close to 500k miles. It did not break DURING hookup. During driving.cke Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 5