Dave focuses on the rear gears......
Its a 7 speed auto with a small motor? Needs the digger gears to get out of the way.
What if it Snows?
Discussion in 'Questions From New Drivers' started by Dave_in_AZ, Mar 19, 2018.
Page 2504 of 18557
-
WesternPlains, D.Tibbitt and FlaSwampRat Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
WesternPlains, D.Tibbitt, Tx Countryboy and 1 other person Thank this.
-
WesternPlains, D.Tibbitt and FlaSwampRat Thank this.
-
WesternPlains, D.Tibbitt and FlaSwampRat Thank this.
-
The old CFI; in 1997, was hauling new Nissan forklifts out of the Marengo, IL factory to dealers all over.
Were usually the 3K to 6K capacities, cushion tires. Forks removed, turned around and shoved up under the first one's carriage. loaded off center, left, up against the nose. Angle cut chock blocks against the tires, and a 2 x 4 nailed to the floor to lock. Next one same, except loaded off center to right, and nailed/chocked front and back, etc and etc till full. All arrived sitting in same positions as loaded. Believe Nissan did the actual loading and blocking. Be bad news if rolled. but cruising level, it worked.WesternPlains, D.Tibbitt and FlaSwampRat Thank this. -
So you had a picture of that older side loader. Now we have us some opportunities here. If the trucks are salvageable, that side loader and a bit of time, you could put together a nice rig. Old school style.WesternPlains, D.Tibbitt and FlaSwampRat Thank this. -
Good to go!WesternPlains, D.Tibbitt, Cattleman84 and 1 other person Thank this. -
FerrissWheel, WesternPlains, D.Tibbitt and 2 others Thank this.
-
FerrissWheel, WesternPlains, D.Tibbitt and 1 other person Thank this.
-
FerrissWheel, WesternPlains, D.Tibbitt and 2 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2504 of 18557