579 wiring question.

Where did you get the lights for the 579 from? If you don't mind me asking, been having a hard time trying to find a kit that was made for that truck.

 

Go to the dealer with your serial number and ask for them to print up the wiring diagram to figure it out. This may be a power switch that foes through the body computer and has a place that it ends up at

 

Good advice here.

 

Similar question here so I won't start a new thread. I want to add a dual function pedestal light under the bunk. Clearance/signal. I have wires coming from bunk corner, that's switched in cab labeled spare. Question is where might I find a left/right signal feed? I know I could go off trailer plug, but really don't want to because if their is an issue down the road it will effect trailer lights. This is on a '18 567.

 

Look on the frame at the rear of the sleeper in the wire /air bundle. there might be a 3 wire plug that say something like snow plow lights or ??? I cant recall exactly but it is for l/r/taillight to tie into At least it was there on mine.Even comes withe the correct connector to tie into.Best i can tell you other than maybe splitting your cord and adding a junction box on the frame.

 

I'll have a look. Thanks

 

Found it. Thanks

 

how do you connect to the three pin plug?

 

Thank you all alot . You all really helped me out

 

I have 2017 Peterbilt I’m trying to put an electric brake controller. On I have purchased everything I need for example 30amp fuses, electric brake controller, 10g 25f wire 7 RV Blade Plug to 7 Way Pin Type Trailer Electrical Adapter Connector with Mounting Bracket. Need help connecting this to the truck brake wire and hookup to the electric harness that connects to the trailer.
Need help. Thanks