here is the whole thing, if you haul heavy you need hp and torque, so in order to have that you can't have a little truck tranny. When you get on...
The 9LL and 8LL are low torque trannys, meaning if you want a big hammer under the hood you can't get one, thats prolly why they give you such a...
The gas patch in sw pa, haven't had alot of time to get on the computer. Driving a new kw with a ISX 550 hp and I think cummins is rating hp the...
the trucks with the detroit will be cheaper because nobody wants them, I would go with a 3406 without even thinking about it
scheids, CDS, Haisley, st. joe or try www.pulloff they have some used ones on there some time. If you are worried about cost, then maybe you...
not really any tricks, pretty easy and straight forward
that 3126 is a guttless POS, you would need a 18 spd AND a 2 spd rear end to get down the road decent
Are you loaded both ways, if only one way you should have no problem getting unless you are running alot of hills. Is is pretty flat up there? I...
$1.75 ain't that much with your own trailer. $1 is about the norm for freight haulers, but that is mostly because they don't know any better. You...
I was just under the truck and there is already a anti-roll piece installed under the tank, it is bolted to the tank saddle and then connected to...
Thats way too much for a Freightliner/detroit/9 spd combo, you could buy a pete with a big hammer and an 18 spd for that.
You better be putting that on a step, as most flats are going to be too tall. I could only haul 8'4. you would have to have a low set-up to get 9...
thanks I'll have to see about that anti roll kit, they must not know about it or I assume that by the thrid time they have seen each truck they...
the red top is what comes with the celect plus I believe, all the newer n-14's were pluses. they have more electrical options in the ecm than the...
KW has done all this under warrenty so I'm not sure what type of glue they used. KW also says the tank is rolling but I say if its rolling they...
I think you can just plug off the wastegate and leave the turbo alone
anybody out there having any luck getting the rubber under the straps to stay put. We have 3 09 w-9 kw's with a single 135 gal tank. They have...
but they are using current emmisions not the new stuff, they will not put that stuff in until they absolutely have to
what he said :biggrin_25525:
adjusting auto slacks does not hurt them it is if you back them off, it strips the gears inside. This comes from talking to the slack people at...
