I would say a pit or a lift would be the biggest thing I would want. Radiant heat is great too. A friend of mines has it in his shop and its nice...
I have the 520 and its great. Really like the truck tools that track maintenance miles and quarterly fuel usage
That's a great idea, didn't even think about doing it that way
That's my plan. Going to pick one up this week with some new coax and see how it tunes.
That's the route I'm going to go. I did get it down some. I had 2 4ft antennas that I swapped out the 3ft for. That brought it from going into...
18' Rg59 coax, cant remember who makes it, but its not truck stop brand crap. Running 2 3ft fiberglass firestik antennas mounted on the mirrors
I have a new stryker sr 655 that Im having high swr issues with. I have checked ground continuity and continuity through the co-ax with my...
Im thinking power and ground issues. I have the print out of what cat did on the ecm and the cruise is on with the correct high and low speeds. Im...
04 379 just swapped a 6nz into it. Cruise worked before swap. Cat set parameters of ecm on new engine. Speedometer works, tach works, governor...
I hear Rosmella a lot. I happen to like the way it smells
If its Rotella, the oil smells funny for about the first 500-1000 miles after an oil change. It is normal, something about the additives being...
If you don't use ssb, I would go with the sr-655hp. Its $100 less than the 955 but has all the same features except ssb. I got my 655 converted...
It shouldn't be too expensive either. The place I got my radio from did the conversion and peak and tune for $40.
They need to be converted to operate on cb band. If you aren't good with precise soldering, I would have a shop do it. The antenna will work fine...
Did you have it converted to be used as an 11 meter radio.
http://www.kustomharness.com makes an adapter harness for 40 to 70 pin.
Don't let the city set your view of the rest of the state. I have lived in NY all of my life (except for 18 months in PA). Most of it was the...
I talked with Kurt today. The tach issue just requires it to programmed to my truck since the ecm came from a freightliner. The codes are most...
I saw another post where someone did the same swap and had the no tach problem, but no one answered. I pm'ed Mr. Haney on another site. I'm sure...
The 6nz did have a partial rebuild done. It got new rings, O-rings on the liners, all new bearings, new valves and guides in the head, reman...
