Ok I work for a company that services the oilfield( moving equipment etc.. and they have crews that build roads and other oil field related stuff)...
Im a company driver and some of my loads are % loads, do I have a leg to stand on by telling them I want to see the freight bill's so I know that...
We found a 06 t600 with c-15 and a 10 or 13 speed with 800k for 24k. Is it to much? To many miles?
We're looking to stay in texas and surrounding and something hauling equipment/ heavy haul. Truck we are looking for something that has some power...
What truck ( make, engine, trans etc..) and trailer set up would you buy and why? We are looking at regrouping and adding to the fleet and...
Ya this isn't my thinking on this one lol. If we swap transmissions should we try and find another 9 speed or maybe a 10 speed? Is there a...
96 Pete 3406b cat with a 9 speed direct. The trans in it now is about shot and the boss wants to put a auto trans in it, can this be done and...
Well we replaced the filters and I dont know why but our guy rebuilt the air/fuel ratio and everthing seems fine, well for now.
The link doesnt work. Well we replaced a leaking connecter and a pin hole in a line. It seems to be ok so far. I thought the same about the brake...
No it's fine and just all of a sudden it started it and no lights.
Well on a normal 80,000 load seems fine but I have about 90,000 or so now and it aired up fine but dropped while it was sitting there and...
Power seems ok but I don't drive it either. I know the filters were changed a few months ago.
Lol no I'm not here that much.
96 Pete with 3406b and 9 speed , the truck has been running daily with no major issues but our other driver says the truck will get to about 60mph...
On the supply line, how much pressure should it have? And the pressure valve is on the tank correct?
Well I was talking about the air gauge in cab when the compressor is on it gets to around 100 and kinda stops until I rev it then it will slowly...
Ill try that tommorow. I noticed to that the compressor kicks off and on like it should but seems to get stuck around 100 unless I rev the crap...
07 9400i with eaton rear ends, no air leaks, new leveler. The leveler is adjusted right also. It has pressure in the bags but it will not come to...
Ok I have got out of a truck for a little bit and put in a office spot ( which isn't going to last long) but I need to file our ifta for the last...
I agree....
