I read on one of his videos he doesn't like advertising the shop he works at, cause they don't support his you tube channel, so talk to him first...
Go to You Tube and watch KT3406E videos specially the one on post #20 here in your thread and call this guy talk about what you want and get a...
My serial 1LW 31037 475 hp steel top pistons, but if I was you I'll order the one piece steel piston from IPD or for that matter their entire...
It's over, finally. Congratulations Dan.
I have over 800 hp and is not different to drive than when it was 475 hp, nothing to tame about, just way more fun, my trans is a 16713 and ran...
Is that a ground post on your head right by the C12 sticker?if it is pull it apart clean it and done.
3406 is a mechanical injected engine, it was the first made of that series, some people call it 3406A because then came the 3406B, but there was...
Had to come back and finish this thread. Monday went an checked all the fluids to go to work, up on inspection found some coolant dripping from...
Great, very valuable information, Thank you.
Thank you guys, Dave, I love Hisperia and Victorville, it used to be quiet and nice when I was there, 1991 and 1992. used to hate most of LA area.
I have a 5DS 600 B/S program, also I rebuilt it in June 2017 with around 120k miles since, what about the bubbles in the water bottle? I'm sick...
Cat 1LW, few weeks a go my temp started climbing, even with fan on, empty or loaded will reach 210 and stayed there and had to keep an eye on it,...
Bully dog, Pittsburgh Power and full tilt are the same, that's what I have, a friend of mine got his from PDI it's supposed to be a slightly...
Before the S60 all Detroit series 53, 71, 92 and the later to my knowledge 149, were two strokes engines, of course Detroit made some other...
No. the rubber pieces will stop at the filters, if they made it all the way to the check valve, that would be the least of your worries, since you...
Me too, a year and 100k miles later = happy trucker.
It will hold up mine is rated at 1650 and my engine is close or over 800 hp been like that since 2010 not a single problem.
Not exactly true, my 1LW has been running at 132 for over a year and not a single problem with injectors O ring, Somebody here posted not long a...
Did by any chance you replaced the carrier bearing before you notice the vibration and if so which brand did you bought?
I have way more hp than the OP and have an easy pedal 2050, install it couple of month ago and no problems at all, before that was an 1850 easy...
