I finally got around to installing that fan shroud on my 06 W9 C15 Acert. When you talked about making it work before, you mentioned something...
Is it true that the oil temp reading on a 2006 KW is calculated by the computer? That's what I was told and I do not see a sensor is the sump....
The few places I talked to last week were telling me that 15 psi is still in spec and don't worry. I have to think that if 30-40 psi at idle is...
Superhauler, how do you go about putting the new fan shroud in. Looks to be pretty tight in there. Does the whole fan assembly need to be unbolted?
Thanks. Aftermarket place has one down the road for $400.....will save me some coin and hopefully hold up better.
I have a 2006 W900 with a C-15 in it that I recently bought. Part of the fan shroud was missing. After talking to Kenworth I figured out that...
Not sure if it makes a difference but this truck pretty much sat for almost 2 years. Has 830,000 on it. Changed the oil before I started using it...
Talked to one guy that said the oil regulator or bypass valve in the oil filter housing is a cheap place to start. Make sense? How do you go...
I checked my oil pressure with manual gauge, and the dash is accurate. Now where to start looking for the cause of my low oil pressure??
Was just curious what the oil temp and pressure should be on my MXS Acert. My oil temp seems to run in the 200-220 range. This is with coolant...
Recently bought a 2006 KW with a MXS C15. According to the tach it is idling around 400 rpm. Either the tach is off or it is idling too low. It...
Recently bought a 2006 W9 with electric windows. They go down fine but are slow to come back up. Seems to me they are binding because I can grab...
Talked to my Kenworth dealer and just the back panel for it was way more than the complete kit form fibertech which they also sell so he only...
Do you mean the long one used to adjust belt tension?
Have you had an aerocab done there?
2006 W900L with 72" Studio. Was wondering if anyone on here has any experience with this. There are 3 kits that I have found. Fibertech, Prarie...
My truck has 2 sets of v-belts. One set for the accessory drive, and one for the fan. Acc. drive runs A/C and alternator. The set for the fan are...
Loosened up the fan belts to replace on my 99 KW T800 with DDEC4 12.7 Cant seem to get them worked over the fan and get them off. Do I need to...
Bought a 2006 W900 with 72" aerocab sleeper that I plan on removing and making a day cab. The truck is going to need exhaust regardless. I was...
No. This was in Wisconsin. Just got home. Was able to figure out and talk to some previous owners and find out history of truck. Ended up buying...
