Here's a dirt cheap way to upgrade the bulbs without causing glare... thisnis assuming the factory volvo housings aren't burnt up and old as dirt....
Jeez I forgot all about this thread.... I ended up going to www.deepspacelighting.com and buying their Morimoto md2s3.0 kit, I believe they now...
Solved : Someone had the inter axle and diff lines backward at the back of the switches. The interaxle switch supplies air to the diff lock...
Quick update: I found that when I turn on my rear diff lock then the interaxle gets air as well. When I flip just my interaxle switch i get air up...
My interaxle line into the diff has no air when I flip the switch, I verified the switch is putting out air and it is so I figure there must be a...
I didnt think the X15 used a crankcase filter anymore like the ISX15 did. The ISX15 came with a empty canister as a filter option as Cummins...
Dude chill out, this is a 5 year old thread and half these people aren't on here anymore...... those pumps are a dime a dozen and can be bought at...
Call Eaton customer support, they can work with you over the phone to find the perfect file.... noone else has a clue unless they've personally...
Agreed, I'm guessing you either spun a camshaft bearing or the oil bypass relief valve is shot. Cummins has a TSB on the relief valves.
I havent had very good luck with cheap turbos...
Problem solved. Turbo blew after exhaust cracked yet again, the turbo had been acting up for a while and was my likely culprit. New manifold,...
I swapped in a oil cooler from a mxs/nxs, I also plugged off my turbo pre cooler. Neither of these were necessary.
Yeah makes sense, the guy who does the tuning suggested going 16:1 but keeping the twins. Said I'd absolutely love this engine after.
Just personal preference. I do not like the way the 16:1 drive, too laggy. How do you counter slower responce.... add more fuel, it's just not my...
I am, spent all winter driving other people's trucks and weighing my options. I've determined I hate 16:1 si glen turbo cats! I love the sdp...
It's funny you ask this today because I just decided to get started... finally! I stopped the guy before he cut the counter bores, i decided to...
Crap, this showed up and I commented on a old post...
The truck has been sitting since I tore it down. I've been busy and haven't had time but we just sold some other iron and are going to pull the...
Cat c15 Sdp rebuild help Here is another thread on it. And here is a pic of what blew.... [ATTACH]
Yes, when the mechanic rebuilt my engine he did not cut the counter bores. In 5 spots along the flange where the liner sits on the deck, I had bad...
