I have a 98 4964FX that needed new wiper arms in June of 2012. These arms had a nut that held them in place on the splined pivot, I think your 89...
Thank you for the quick reply! I will try what you said and go from there. I don't think I can PM you because I don't have 50 posts. I'm not the...
Hello Mark, I have a TND 710 that I purchased early in 2012. The serial number is 710-049179-EL-12W13 V3.4. I have been having lockup...
I have a 98 4964FX. My odometer would work,but would jump back to the original reading when I shut it off. I purchased a new speedometer/odometer...
My 98 western Star holds 4 pounds when fully charged.
1998 4964FX daycab - 13200 front,46000 rears,18 spd. 3406E cat weighs out at 20150.
Hello, I'm planning some trips from Mass. to New Jersey down I-84 to I-91 to I-95, over the George Washington Bridge and onto the NJ pike. I'm...
Wow! What a nice job,it looks excellent. I'm going to save your info for possible future use. For the moment, mine's doing very well. Thank you...
I have a 1998 4964FX daycab that needed a new overhead console. When I found out the only new one left in the US was $1600. I ended up buying a...
I have the Moto Mirror heated power mirrors with clearance lights on my Western star, and i am quoting from their installation manual. Connect...
Have a 1998 Western Star 4964FX and I put in on the stainless trim around the driver's side headlight assembly,seeing that I have no front body...
Thank you for the reply! Looking at it more this morning, I think they must pull the dash assembly back enough to access the pivots. I'll go and...
Just put a new drivers side windshield in my 1998 4964FX daycab and figured I might as well replace the wiper arms while I was at it. The original...
Hello, I have a 98 4964fx and just went through figuring out all the overhead console wiring. I purchased a wrecked 2003 cab and swapped over...
Hello, I have had very good results with a product called Nok Out. The truck I purchased had been sitting for awhile,and had also been smoked...
If you have access to a computer, go to www.accessfreightliner.com.Click on the register for access link and there is a form to fill out to be...
For anyone that's interested, all the interior trim parts I inquired about in my previous post bolted right into my 1998 4964FX. The parts were...
Thanks for the replies! The vin on my 98 is 2WKPDCJ9WK951143. I do not have the vin on the 2003, as it was stacked on the second level of a rack.I...
Hello, I'm hoping someone can help me out. I have a 1998 Western Star 4964FX constellation day cab that is badly in need of a new overhead...
