I set the brake clearance already. My question is with the "Running Clearance" .025"-.110"
Doing a top end set on a X15 Performance Series. After setting the valves you are supposed to check the running clearance on the jake brake...
High exhaust restriction is a likely cause of this fault. On my truck with the issue, i have replaced the EGR Delta P sensor, EGR valve, exhaust...
Im thinkin my issue is likely a DPF needs changin.....old mechanic here liked to reset DPFs and not change/clean them...
fuel injector return lines at back of head could be leaking. replace the two seal rings on the fittings going into the head.
IF the egr delta p sensor doesnt fix it, check the little holes going to the sensor on the EGR venturi, they are famous for plugging up. so much...
I have load tested the wiring, did not pin drag them. Ill do that next time it is in.
Pushbroom - 79983603 Goodysnap - I have removed and cleaned the venturi. Code happens with full load engine running at around deg Celsius. There...
This unit worked fine all sumer and now that we are hovering around 0 degrees C here in northern Canada the code is back....anyone have this before?
The reason I mentioned clutch switch is because when you press the clutch it usually shuts off your jake (allowing you to shift gears without...
clutch switch?
Usually caused by bent tone ring or someone assembled out of time. The intake cam has a tone ring for the sensor to read. The pump timing should...
steer shaft ujoints? king pins?
This unit has logged this code a couple more times, both times EGR valve 0% open. EGR differential pressure reads 0.7 InHG. Pulled the sensor and...
Possibly Quantity Control Valve in the fuel pump. Early signs of a defective one is surging at idle and smooths out with a little throttle. Its...
I have not tested the wiring yet. The thing that really baffles me and is likely the cause of this is excessive moisture on the sensor. The...
Bingo
I have replaced the EGR valve as soon as I saw it threw this code when the valve was commanded 0% open. Ive got access to quickserve. I have...
the pipe has a teflon coating that is supposed to prevent buildup. drilling it would for sure damage that coating. also the ports have a bend...
clean the ports for the EGR delta P sensor. The holes plug up with soot and the sensor doesnt read correctly. common symptoms of this issue is a...
