[ATTACH] [ATTACH] Two of my Jake’s have the original type solenoid but one is different. Is that ok or should I try and find and find a matching...
Thanks I’ll check my gauge connection and see if it’s the same and also look on the bell housing
Another question I have is ,my tach is unhooked is it as simple as finding the correct wire and running from fuel pump to tachometer. Guess I...
Is the method the same for both types is the outer base method required I noticed a lot of people do the inner base method
I have a 71 855 small cam 350 I’m going to run my overhead and I’m not sure what injectors I have pt or top stop. What’s the best method for this...
Ok so I need to update the studs
Also I thought the lug nuts looked a little strange, don’t have the washers attached to them
My drives are stud pilot and I need a rim on my driver side steer. This looks like a hub pilot to me on passenger side so I’m guessing I can use a...
[ATTACH]
Good explanation thank you
I’ve noticed the difference in big and small cam pumps have different adjustment screws so on the small cam behind the bell shaped cover is the...
Ok so pull it towards me and secure then forget about it unless it’s really struggling to turn over. Also how do you use it correctly
What position is this supposed to be in. What way is open and close
[ATTACH] I think this is compression release. It’s easy to move and the spring is attached to nothing
Good deal, I was very pleased to see those Jake’s on there. I’ve heard a lot of small cams even big cams didn’t come with Jake’s
[ATTACH] [ATTACH]
What is the deal with the new plug, does that indicate anything. The other one to the left is the same way with one new shiny plug in the same...
Looks like I have piston cooler, does that look correct
