You are not wasting your time.
Please let this thead go as informational ,this is very good information,
What kind of work do you need.
Area diesel service inc at carlinville il they have it all'
Yes i know
If a FASS give you more power you would not be able to talk about it,like a fuel wire.
Good to hear from you. You dropout out but it turned out good.Thanks for checking in.
A 1mm is 70 pin.
They need a better rated tank for fire protection,the ones they use now a not safe to transport the ND crude.
What did they charge to put that head on.
If everything online checked out well, the broker must have been right.
Sounds like a derate not a turbo,can you pull a code from the criuse
Bingo, we have a winner,this is your best bet.Get your ball valves and getter done!
Run your tanks as low as you can and look in them with a bright light at night to see whats in there.
Good night
Are you talking of shutting one return line off and pulling out of two tanks. I have never tryed that.
I put two ball valves on each tank and run one tank or two ,and if low pump one to the other then run it. The reason in did it in the first place...
I have full lockers with 2 air switches in a pete, and then there are some KW with 3 switches and full lockers
Check with used truck dealers or new truck place and see where they get theres done. I know the pete dealer at Louisville has one.
My little windmill fell off the shaft of 7cz,I was 2 hr into a 7 hr bobtail. I went to the house going soft on the pedel. Then ordered one from...
