I don't even drive my truck until oil has reached 170F. I prefer 200F or higher. The oil additives such as Zinc don't even start working until...
You will be just wasting time and money. And cooler oil isn't always better...
the amount of oil passing through a bypass oil filter will make an insignificant contribution to oil cooling if you attempt to cool it before...
I haven't done this, but seems most are reporting about .4mpg gain. I haven't done the exact math, but if that gain is true, it should pay for...
not sure why you think you have to change the wheel bearings "every couple of years"
Well cool..... didn't know Schneider had a landstar type of deal.
If you like dispatchers dictating how you work....go Schneider. If you want to be about as independent as you can be without having your own...
Between the two of what?
Cummins n14 here and still driving it with over 1.6 million miles. Never been overhauled. I have rolled bearings in it a couple times. Still...
Hook up a manual gauge and verify if you still have the oil pressure fluctuation...if the manual doesn't, then you know it's either an electrical...
If most of you would actually READ the new regulation...it allows for ONE button press to initiate a call. Whether it be a single button on the...
$6000-$10000...most likely $8000 or more
that should not be an issue.
AFTER....I like to know how much boost my engine is actually recieving.
yes...it's in the tailshaft of the transmission
I agree with the amount of load you are carrying makes a difference. That was one of the main reasons to my the lowest common denominator...
Actually, it's 1370 rpm that Cummins has published as the lowest recommended Cruise RPM. But I admit, that's really splitting hairs. Anyway,...
It's both power and a waste.
I have an N14 that has over 1.6 million miles. I bought it with 480,000 miles. I have had a few oil pressure issues with it over the years....
the 50 weight rating of transmission oil is a different scale than the gear oil rating that is used in our differentials. Basically the 50 weight...