I'm thinking it's your oil cooler, but I dont know if the water in the radiator has that same stuff in it....if it does I'm guessing its...
A dimmer switch,in the turn signal....its a 99 pete, I never knew there was something like that in it...thanks
So did you have to pull the breaker box out??? To get behind it... If you can you tell me how you did.... I think that might be my issues is that...
My high/low beam switch is on the turn signal on the side of the steering colum..
Sorry the type of truck would of helped....its a 99 pete... So the dimmer switch for the dash lights??? If I'm understanding right, if the dimmer...
Okay I need some help, here.. From night to morning I went from having,headlights to none at all.. The bulbs arent burned out, there is only...
Looking for a good tire that last on spread axle.. Tires size is 24.5LP and its a sliding spread..thanks...
I had the check engine,stop engine and fan kicking on a couple years back. I took it in and put it on the computer they said it was the...
The mechanic working on my truck said he thinks it was a protrusion problem....the others say it got to hot, but no signs of heat...its beyond...
From what I understand dropped valves usually take out the piston...and to me it wouldn't matter if it was a used piston the valve caused the...
Well I was at the shop last evening and the mechanic said the deck was good and the protrusion was within one one thousands....the head torque...
I appreciate all the info...I'm having peterbilt in El Paso put it back together with the IPD parts, I talked to the mechanic and he said he's...
That's not what I wanted to hear....LOL... How many miles were on those kits, I've talked to a friend of my dads and he's used these kits in a...
They couldn't give me an answer of why it happened...and Chop everything checked out fine they didn't need to cut or shim...
Mr. Haney how much would the boost wire and fuel wire would help on my 3406E??? I have a PDI manifold and turbo..... thanks...
Sounds pretty similar to mine, I got a little over 8 then 3k... keep me posted would like to hear what was the cause...did you go with the same...
Chip I went with IPD parts for my rebuild, they look like quality parts all brand new no reman stuff... but 8k miles into it lost a piston cooler...
The freeze plug was in the rear of head and one between hole 5/6 and hole 4/5.... peterbilt in el paso took the head off and it ended up being the...
Yes it will be good to find out why this happened...today the head gets pulled...I'll update you guys on this.
Yeah don't know why the radiator cap didn't go, it isn't a new cap...the other thing I can think of is broken liner but if that was it wouldn't I...
