Im thinking #5 liner protrusion was 0200 to 0300 on that cyclinder and thats were the gasket blew we thought it was from using starting fluid (not...
Yeah Im turning the motor with the tool to see if the leak shows up but nothing Im losing pressure but might be the gauge last time water pump...
Problem is I can smell the degreaser I put in the system to clean it so I know its getting in the oil.
I blew a head gasket and replaced it (checked liner protrusion it was good) engine hydro locked after it shut down. Towed it back. Took the...
Recently did a head gasket on a 3406E 5th cylinder hydro locked fire ring gave out. I havent changed the oil I was going to run if for a couple...
meant to say ( Mechanic who owns trucks )
Im a Mechanic to owens trucks that when they brake down I fix them thats the only way to make money. I charge 99.00
This guy is not good at explaining, I think the 1 stfilter was getting clogged and slowing the truck down (changed it and he hasnt said anything)...
Problem solved So who ever worked on this before didnt line the flywheel on the right spot so when you pin the flywheel #1 was not TDC. I pulled...
I just replaced the head gasket put everything back together started to run the overhead, I did intake exhaust and injectors then tried to spin...
Not yet driver just told me about it today (30 min ago) said it started yesterday so when he gets back to the shop Ill look at it but if its not...
Driver says truck will shake and when he lays off the throttle it goes away does it every now and then no codes the check engine light came on...
I have a Cat 3406 5ek that Im going to rebuild this spring and have been seeing a lot of info on Oil bypass systems but dont know anyone running...
Figured it out just jumped a wire to selonid from key switch other wire has a short somewhere.
It started on and off slowly then we changed starter to please the driver after that issue was still there I checked the starter we took out and...
2003 Kenworth T600 Truck has been acting up the key would not start it so we jumped the solenoid to get it going (we changed the starter and...
You wouldnt happen to know where I can get a diagram of the cab electric circuits. My power wire to the cab gives power to the frame and lights up...
Cool thanks a lot
This is a 03 t600 Truck will not start with the key (we are jumping the solenoid to start it) Key has 12v out when you turn switch to start,...
So once it burns off fuel in the cylinder then it will run normal. Anyway to identify the injector?
