Looking for a certain speedo dip switch setting. Recently switched from 24.5 tall tires to 22.5 low pro. 2000 classic cat 3406e, 18speed fuller,...
Yes they did have some floating around i want to say 10 or so 2006's. But they are not fully decked out with all the gauges, bunk windows, etc.
Generally most SFI trucks were ordered from the dealer. But once in while if they need more trucks they will buy a truck here and there off a...
Schneider finance does work with their customers. If you can show them your worth it and trying they will help you. Ive seen people get into a...
Thats what i needed to know. Thanks
Can anyone tell me what the usual coolant temp range would be for a 2WS ?
Input shaft/fork/ front bearing was replaced at the same time also.
Has anyone else gotten a bad/defective fuller easy pedal clutch? Or flywheel issues? Mine is 8months old and vribrates like crazy also...
Superhauler, where is that guy out of? Would he be able to do a test on mine? Thanks
Have petro make sure that wheel sensor is pushed in close enough to the exciter ring on hub first. Thats part of the job they should have checked...
Also what is normal operating temperature for a 3406E?
Well I got an accurate reading and pressure is right at specs 78idle-95max. Now the truck ran fine until on the way back from the first trip out...
Can anyone tell me if its normal for my fuel pressure gauge to drop down to 0psi after i shut truck off? It bounces alot also when running. Its...
Good deal. Fyi the vibration is completely gone now after loosening and spinning pressure plate 180 degrees and replacing engine damper.
Has anyone heard of the 2WS serial#'s breaking a crank? Im curious. Also what would be the main things to for in an oil sample with these engines?...
Thanks, I loosened and spun the clutch a half turn on the flywheel. My vibration is considerably less now but still there yet. Got the new damper...
Truck ran great on the dyno. Rated 500hp. It ran 415 to the ground and blowby was 0.9 peterbilt guys said he would look into the clutch making the...
Yes i did try pushing clutch in with truck sitting still idling also and no change. Its a real mirror shaker at 1350the rpm. I picked up a...
Well after replacing the injector harness and changing out another bad injector i got the engine running correctly. Now i need to figure out what...
Thanks, I will try the injector harness first. Are injector harness problems somewhat common on the 3406E? I know the detroit 60 engines had some...
