Egr crossover and all ports are clean, gonna take off the manifold in a bit and see what it looks like
Lol makes sense, I’ll see what it’s reading, should be around atmospheric pressure right right ?
With no load it should rev up fine, no load parked doesn’t need boost, regardless it shouldn’t be throwing black smoke anyway
Intake seems to have a lot of suction but I’ll pull off the manifold and take a look
Egr cooler replaced as well, same issue
the intake manifold is open, the CAC is bypassed and its sucking in a lot of air with the engine running, no codes for manifold pressure either
hey, got a cummins isb 6.7 on a yard goat, blowing black smoke and has no power, had a code for an egr valve, changed out the valve and the code...
yeah i know it aint much its just that i had the tranny down so i thought id get to the bottom of it while i had the chance.
Hey y’all, dropped a dt12 for a clutch actuator issue and was gonna change the rear main seal since it was dripping from the little hole in...
thrown away from the forum? what for?
for this relay, where is it located? in the sam cab? have this problem on 2010 cascadia where the lights and 12v shut off with the ignition off,...
Sensors have been replaced, unit has direct battery power so no fuse box issues, and no dampness or major corrosion found
hey everybody, got a 2010 cascadia with a dd15 and eaton autoshift but has a clutch pedal, truck initially would have the issue of transmission...
I don’t think I bypassed anything, my pin locations were fine because I checked continuity from the def module connector pins to the ecu connector...
ESN: 73913153 ECU was removed and def module was disconnected when I found ground with power, I’m referring to a harness ground, I don’t have the...
hey everybody, we got a 2016 yard goat with a cummins isb 6.7, came in for a def metering module code that was coming up as shorted or open...
They’re sealed joints no fitting on them
These are sealed u joints no fittings on them
Driver: “Idk what happened boss, I was tryna slide the tandems with a fully loaded trailer and it just wouldn’t go anymore”[ATTACH][ATTACH] [ATTACH]
Hey y’all Got a 2010 cascadia with an Eaton auto 10 but it has a clutch pedal, truck will randomly rev up and flash it’s gear, it was doing this...
