Just tell them the oem ecm got fried and you couldent pull a image off and you bought an ecm from a bone yard they should be able to go in the ecm...
Most likely a damaged roller or cam,possibly just a over head but pretty rare also not sure about mxs cats but some years c15 have issues with...
Check the lines from the govner to the air tank and from the govner to the dryer i see the lines rot and leak check it with a spray bottle with...
Number one if you read my post i said the acc drive needs to be timed and the compressor dose not have to be timed an n14 or an isx as a matter of...
If i remember correctly the compressor is not timed on the n14 only the acc drive the older small cam motors were timed,are you talking the front...
Probably a blown exhaust manifold or turbo mounting gasket
I work for cummins in so cal its a great job but i hate it.great pay easy going but i feel like i have taken a step back in my carrer.if your...
Drill it out and put in a new nutsert only have to drill out the outter flange of the nutsert
It can be done beat bet would be to find a wrecked truck that way you get the engine and dpf with all the brackets i did a couple swaps for a...
Petes in the left mirror its pricey
Check out red dot.com
Pia i have changed them its faster to drop the whole unit out the shocks and a few other parts have to come out then the upper bag bolts are hard...
The noise is most likely the overhead was done incorrectly that would also explain the low power and fuel milage drop,also the worst thing you can...
Heat the bolts if they break sometimes you can weld a larger nut to them let them cool down some works for me a lot if the bolt breaks it can be a...
Yep it will be on the outlet side of the pump with a jic fitting style hose Probly 1/8
Follow the line to the firewall it most likely runs to a manifold on either the inside ot outside of the firewall and that is where the switch will be
It's manul hooks up to the fuel filter head
Hey guys I've never worked on a paccar what's these bad boys like? I've been told there pretty similar to s cummins,reason being I'm...
How are you holding the shafts in place?are you assy it on the bench.I set the housing in a vice and do it all on the bench,yoke everything,its...
I replace cooling nozzles on every overhaul I do,u have to drop them anyways and I have seen a few twist while taking the retaining bolt out
