Like you said fuel pump is a major engine killer. Keep the oil changed. Adjust the valves. Guessing since it is in California it still has all...
Fuel is the biggest expense, makes sense to try for the best mileage you can get. Spec the truck for the work it will be doing. Use your foot.
Hardware stores usually have kerosene in gallon jugs.
Messing with your boost because it goes into a derated mode. Would look closely at the harness under the valve cover. They are known to break...
Paid nothing with company I leased onto.
I have the China made one from eBay. Cost about $125 US dollars. Had it little over a year. Best $125 I have spent. If it quits I will get another...
My opinion seller would be a fool to finance it like that.
Usually a blind load has to with politics. Customer doesn't want to buy directly from a certain manufacturer, so it is made to look like it was...
One of the things to consider is can you work on the truck enough to keep it out of the shop? Between down time and the cost of a shop will break...
2015 T660 Midroof 72" sleeper 244 wheel base Cummins with 13 speed about 150 pounds of extra junk 130 gallon tanks at 1/2 full and me in it....
Take a look at the roads in Michigan!! Not sure more weight is better
Refer must have been doing a Regen!!
Pledge Furniture polish, doesn't attract dust.
Sounds like another half ### job and lightening of your wallet. Good shops are rare now days.
On a Cummins ISX 15 fuel pump can take out the engine. Now that's what I call bad.
Like mentioned take 220 bypass. Have y'all ran I-10 around Lake Charles, LA? Another bad rough spot. Or highway 190 from I-49 to Baton Rouge??...
I know two guys who left the company I work for and went to Qualify Carriers. One is company driver, other owner operator. They both like working...
Yes you can see. Should be wires going to the rear of the axle housing. About 1/3 of the way from the bottom of the big round part. Be easiest...
I would look and see if the wires were plugged up on the sensor.
The only trouble I see is the fact that they are so heavy and odd shaped. What about the yokes? The nuts are very tight.
