Alright thanks a lot everyone, I'll try cleaning the unloader and go from there if not it's a new compressor supposedly they don't make rebuild...
Hello all, I am having a problem with one of trucks air compressor and one of my mechanics found a quick remedy to get us by until we get it in...
Old iron I don't to put a guarantee on this but I believe most Jo dog's that I have ever been around will sit approximately 5 - 6" taller than the...
That's a very common way to plumb systems as described when pulling particularly dump trailers to eliminate the need for the driver to remember....
Hello all, we have a 2001 Kenworth W900L in the fleet that the driver is complaining of what feels like only getting action from the front brakes....
In our neck of the woods things have really taken back off in the last few weeks to a month or so.
There should be a micro switch on both the throttle and the clutch also check your wire connections over time they tend to corrode also your...
It always amazes me at what you guys out west have to go through to move machines in the 70-85K range, back here in PA, WV we run 350, 336, 360's...
First off the RPM's would be in 100's not 1000's. Being that you are that low on fuel and if the temperatures have been in that range for that...
Thank you guys for the suggestions the truck should get into our shop late this evening so I will check and report in tomorrow. As far as the...
Hello and thanks in advance for any help anyone has or ideas. I have not got a chance to get this truck hooked up to CAT ET yet and have not got...
The lady is wrong. If you currently have a valid CDL, then adding the hazmat endorsement is as simple as taking the test, clearing the threat...
I agree on doing the work for strangers and the random calls, but typically if it's not someone who is a regular they are paying cash or with a...
I'm in the same boat as Cory, we work on our own fleet and work on a few outside companies to keep our guys busy. We charge $ 70.00 / Hour in...
Drove approximately 2200 Miles in 36 Hours / 34 Hours Driving Time. Left Thompson Falls, MT Stopped in Murdo, SD for fuel and a 2 hour cat nap,...
More than likely you will need to swing by a truck dealership on 18 speeds anyways the lines are a goofy size 5/32" if I recall correctly and no...
Yeah there is no problem with that route used to be #### near the only way across the state, you could just stay on 30 on over to Breezewood and...
Are you planning on paying a salary to yourself or "the driver"?
I would highly recommend disc brakes no while you have the option we have recently upgraded our fleet to a lot of new T800's and W900's and so far...
Well your pressure gauges for your tag and your air pressure gauges would be mechanical and just simply need to see the air pressure too move...
