well no change. the shop went through it and said everything was working great on the bench. i brought it to him without the solenoid since it...
i pulled the pump off myself, taking it to the shop that rebuilt it last time a d hes gonna bench test everything. ill post the results
pump was rebuilt 3 years ago but i guess it could still be the problem. what exactly does a shot of ether to the filter do? it fires off the...
so to sum it up.....new suction line from the tank to the cooling llate..new line from the cooling plate to the filter. new return line from the...
yup i been reading about the lines. i replaced all them this morning..well because they were old and tired looking anyways...200 bucks at least...
little back ground... truck is a 94 international 9400 with n14 cummins. earlier this year truck was randomly shutting down, it was showing cam...
i really hope this works out because its getting exhausting trying to get ac in this old truck lol
oh also had to move and raise my little pto and dump lever box...that was fun :( also, my alternator crapped on me last week (seized up and...
well little update..i finally got a stand up in. havent had real time to test it though..been raining here all week. drove it around for an...
ah ok. ya this setup worked well but the vibration killed it. i really thing a stand up thats not bolted to my back wall will have a lot less...
yup..i did run through that thread. what did u end up using?
yup...well i will order a stand up in the next few weeks. hope it works. the split systems seem pretty wide for the cheap one im looking...
also....i found a few cheap stand ups with 6000 btu on ebay. a 6000 btu converts to 1700 watts..but im not sure how to find the peak watts when...
im looking into them now...seen a few cheapies on ebay. i read somewhere on here theres a good thread about someone installing one but i cant...
true...but i would be worried about the vibration again cracking the lines. would be harder to keep toying around. think a stand up unit would...
also they show 2 ratings. one i found says 8000btu ashre and 5000 btu doe. dont know which to use to figure out the watts lol
ya i overshot the inverter so i made sure it was gonna handle the startup watts. problem im finding is these standups are limited for the 5000...
little update. still have the broken ac in my truck. gonna pull it out and try a stand up ac if i find one with low enough btu and that will fit...
wow...4 years later and my own thread helped me find the right switch...again thanks self...
little update...installed the new volt gauge and running its about 13.8 volts. sitting idle is about 12.5....slooooowly drops if i idle a long...
