Ninety percent of the time we see that it is the steer tires are cupped. Run your hand over the steer tires and see if they are smooth all the way...
Is the engine cold when it is doing this? The engine brake does turn on to help the engine heat up quicker unless it is turned off in the...
If I am not mistaken the part was around $6-700 and its not hard to install. Would take the average mechanic about 30-40 minutes to install.
When we have checked our D12's very very few need adjustment. As for the engine needing the shims to alter the cleareance they arent bad to put...
Happens to all of our tractors running the meritor Air dryer. We keep those in stock at our shop. The meritor part number is R950013 (Volvo part...
Do I need to install a driver or something to make it broadcast a signal? Thanks
Actually once you pull the fuses in the battery compartment, the codes are cleared from the Eaton computer. Our drivers have to do that from time...
Is anyone using this 88890300 adapter? I am reading that is has 802.11b and g capabilities. But the wirelss light on the box isnt lighting up....
I am trying to find the torque spec on the D12 oil drain plug. I can not find it in my manuals. Its an 07 (the one that uses an 1 1/4" socket not...
Actually I set it up in VCADS. with Ratio of 3.58, 16 tooth output wheel, 501 RPM of tire(497 was very close it just varies a little from one tire...
We are changing out tires on tractors from low profile to 11R22.5. They are 07 volvo with an eaton 10 speed and D12 engine. Anyone know what value...
Hello all. I have another problem with the CAN line on an 06 Volvo tractor. I am reading about 120ohms at the diagnostic plug, instead of 60. I...
With the pedal fully depressed, I can still rock the clutch brake. It is close but isnt clamping it.
We actually put an entire new assembly up there, slave cylinder and all. And then tried the old one. It actually seems like the distance between...
We did pull that apart yesterday afternnoon, and it all looked correct.
It doesnt seem to be a problem with the fork iteself. I got under it myself last night. It would appear that even if the transmission wasnt...
Thanks for the reply. We pulled the fork out, and compared it with the old one. They look identical. Just in case we did try installing the old...
Hello all, we just installed a Eaton solo clutch in a volvo running a hydraulic fork type release. Its the one that goes in from the bottom of the...
Im wondering. I never have gotten much into the VEB exhaust rockers. What if the solenoid that allows oil to flow into the exhaust rockers turned...
Pablo - It is cranking over the way like you said. As for watching the cam/rocker/valve operation with the valve cover off, we did that already....
