I hate auto spell. I just read my message and the first sentence should have read "Ty, I just copied". In any case I just thought I'd post in...
I installed a Workman roger beep in my radio the other day and now about to add a trb-x3 echo board. I'm planning on installing a switch to turn...
Thanks for the info. If the bed of my truck is grounded by the metal screws where it bolts to the frame should I still add more grounding straps?
By, I just cord that diagram from the net because it may closely matches what I'm running. I actually used a 12 gage wire from the battery into...
Thanks for all the replies. The SWR is in the acceptable range, I like the way the radio sounds and I'm able to talk with both trucks about 10...
In case anyone else needs the answer, I soldered it to one of the metal housings to one of the pots on the circuit board after opening up another...
What channel does he use?
I'm installing extra accessories on my 29 and the instructions say to solder the ground wire to the circuit board ground. I've never done this and...
It is a Ford Ranger and no my coax isn't coiled up I ran it around the bed and back into the cab.
I'm going that way today. I'll be passing right by him.
So I'd be better off removing that ground wire? I was thinking of doing just that.
It does, thanks. Doe anyone know what fuse comes in line on the palomar 250 type amps?
I can run a couple extra grounds from the bed to frame, do you think the mount to frame ground is hurting it?
I made up a ground wire with an eye at each end which I will be running tomorrow from the mount directly to the frame. On my other truck (102 inch...
I just installed my 29 (peaked at 4watt dk swinging to 25)in my pick up and I could use some guidance. I have it running direct to the battery...
I switched out to A 4' firestik II and was able to get the SWR down to a 1.9 on 1 and 40 with a 1.6 on 20. I have continuity between the mount and...
I was checking ch20 which was originally about a 3.3 but has now dropped down to a 2.8.
I've been away from the hobby for about 15 years and just getting back into it. I pulled my radios out of the barn and had them tested at a cb...
