I looked up atro but couldn't find anything for Monroe they did list for Ford trucks. Do I have to go by the shock eye size which is ls54 tried...
Im going to change the afc diaphram do I need to take off the whole afc or can I just remove the first 2 sections to replace diaphram? Then the...
I tried international dealer to nope they just wanted sell me new ones standard oh they don't make them anymore yada yada bull. They still make...
Well Monroe used to sell bushing's but the parts stores said no longer so I will get 2 online have the part number found them for 42 ea delivered...
I thought they should make bushing's kits too but dealer was like its hard to match those up and hard to get too :biggrin_25512: I'm thinking yah...
Bender what shocks do you use most often ? Would you run the Monroe or oem. Seems odd the oem just collapse set one against the wall after pulled...
The new-way or nu-way not sure how they spell it but they are suppose to be oem according to dealer. It has Monroe on it now the bushing's are...
Are there any parts suppliers that sell parts for trucks like shocks,brakes,bearings,seals,clutches,engine kits ect. ?? For...
Got some new shocks they are new-way suppose to be stock shocks for my ltl 9000 but they don't push out they pull out hard but there were Monroe...
Heavyd ,I too get a little too mad sometimes,I do believe this is a case of just this shop not all are the same I had my bonnet cap o rings done...
Your probably right bender. If you can find a good shop or just even a good mechanic now days your lucky and reasonable rates too. Lot of parts...
tthen worse yet guy you work with makes 3 bucks an hr more cause he is buddy-buddy with the owner and you gotta fix his stuff that comes back all...
Sounds like most of the shops I worked at bender. Then always had do job on book rate too, rusted bolts who cares there goes your rate no raise...
I brought the truck in no time there, look up a drier he didn't service desk did if this takes more than a minute you must be a meat-head. Tools...
Beside diagnose not building air well how about pull the input line by drier and see if compresser is pumping thats diagnosing the prob. Reving a...
I told the tech that I thought it was the drier says it right on the work order left that out oops want it done right why I did it myself new air...
I refuse to go to a shop if possible. Most of the time they don't listen and if its a shop on the road they just overcharge. Other day headed to...
I run additive thru it now either howes think thats what it is or the standyne the diesel pump shop suggested. To drain the bottom off just pull...
It probably is a 97 but was retread in 04 or was 06 got some others that are 00 and 02 so not much older these were mostly bought for the rims so...
Well tires are on all filters changed see if that helps the horse power both fuel filters dirty and 1/3 water froze in them . Tires sure helped...
