Yeah, it's funny. Almost all the stations we've been doing the load just fits. And they just asked for volunteers to work Christmas!?!?!? Pa is...
Nope! you just need a H-2 B visa. Immigrate to the US as a Truck Driver (SOC 53-3030) Those at the top don't give a rats butt about you, or your...
To an illegal immigrant who barely speaks English, that's a fortune! We'll see a lot more of that, plus an increase number of crashes and spills,...
HUGE NO-NO!!!!!! Life on wheels explained it very well. There are youtube animations showing what is happening under the ground to help...
In case you didn't know, Volvo owns Mack, and from the cab down they are identical. Mack has "MACK" stamped on the valve cover, where Volvo has...
They both need work, but pricing is good....
These windshields don't get cut out, they use a rubber gasket. Repair people said that was in case windshield needed to be kicked out. The exposed...
The heated windshield never worked on my VNL, I've had it a year. The windshield cracked and just got replaced, I hoped it would fix it, but no....
I'll add this; I was against electronically shifted manual transmissions (not really automatics, unless you're talking about the Allison) until...
OK, well, hopefully there'll be no more issues.
Right, but the hose doesn't know which compartment it's hooked to. If you set up to load a 2000 gallon compartment, but you've got the hose hooked...
Did you set the gallon amount on the wrong compartment?
I have stuffed a rag into the groove in the rubber bushing, that tightens it up for a while, until the rag gets too thin, then just replace the...
Francis Engineering does a ton of high performance work. Painesville. They're giving way a built 6NZ. Log into Facebook | Facebook
Isn't that Sonny Pruitt's truck, form the TV show "Moving On"?
See if you can get in touch with J R Collins, out at Sidley Mack. He should know those guys.
That's what Bruce Mallinson down at Pittsburgh Power says to do. Run high rear gears in direct drive on the trans, not O/D, and the truck will...
Don't know why I didn't think of it before, but if you can get in touch with any of the big rig truck pulling guys, they'd know who builds Cats....
If you're "topped out" at 72 and only 1650rpm, all your limits are not taken off. That motor should turn up over 1850.
Choose one; Pull hills. Lower gears (higher numbers) will help, but limit speed. Higher speed. Higher gears, (lower numbers) will help but limit...
