Clutch bearing cylinder. Or hose between clutch cylinder and clutch control valve in both case the tranmission should be able dropped for tbe repair.
If you look at the ABS ECU cassing you can see deep corrosion. For internal looking i don't know. Let me know your find.
What kind of engine ? which engine model ? How many miles on it? Are sure after the repair the engine oil level was full?...
Hi, it look like Data link communication are shorted (major) the reason the trottle pedal didn't respond normally it's because in that situation...
For a rear end who ran with loose bearings, it's possible you can see the gear set wear only when you will try to readjust it. Ben
Is it A transmission Pto installation on Vovo I shift ?
Hi is it possible for to put a picture of your cluster on this post ? Thanks
Mid 130 PSID 25 Fmi 0 , Mid 130 PSID 25 FMI 2 are inactive but can you tell me what is the count number ? Is the transmission is grinding when...
I need more information about the fault code list and their Counts, If you have high inactive count of code Mid 130 PSID 25 FMI 7 , did your...
Because sometimes the exhaust brake air cylinder didn't retract to the Off position and generate a lot of back pressure and affect the the turbo...
Is that truck has been parked for a long period ? If so, look at the operation of the exhaust brake air cylinder. Ben
Hi Johny, the Volvo engine D-11, D13 and D-16 use the same Valve Egr P/N, the solonoid on the back of the egr valve is controled by the ECM (pulse...
Be carefull the thread in the valve casting are aluminum and easy to strip. very often the leak is come from the fitting press itself
When the engine run bad is the check light come ON ?
Egr temp sensor
Yes it's one possibility, but there are some others possibility, air aspiration in the fuel system, overflow valve, one way check valve on the...
Is your primary fuel filter is coolant heated ? If so it can be the cause
The steering buttons are connected to the dash(cluster) cannot be check with a test light. Ben
One more thing that can confirm you a turbo problem, when your engine is pulling under acceleration if you feel an engine hick up and/or hear a...
The sound of air releasing is normal ,because when you pump the hand priming pump you increase the fuel pressure in the head fuel gallery over the...
