Inj in non loaded. Find out the adjustment procedure for the cat it is easy.
I would say the skert on the piston is moving. Take the connecting rod off the crank and try to pull up and down and see if you can find anything...
The tool is the best way but you can use a depth mic.
Yes me too but there is always a code because of the abnormal oil pressure when the ecm trys to activate the iva.
No codes normally it will through a code for low vva pressure.
Get your values adjusted and put some M100463 donldson mufflers on to start with.
Where you from
Cummins cm 570 right.
Cylinder cut out if it's a problem with one cylinder even mechanical it will show. The ivas can cause this.
You my be able to narrow it down with rack reading on cylinder cut out test. Run engine off 1 cylinder at a time. Just a thought currous to find out.
If the cruise is on when it does it that would be weird. But if driving with peddal I would say throttle position sensor on the pedal or the...
Check to see if intake to turbo has airline or sensor with wires
I guess I should have asked what engine he had and if any audible air leaks
Setting in ecm should fix. It is either on off or off on.
No air building has nothing to do with egr in engine. I would think check valve on airtank.
Have to change rubber outter seal and linkage from one peice.
I have found if you don't torque the new studs and the new nuts it will not last. I replace every stud and every nut turbos to. I also replace...
It has egr?
Sounds like xy shifter going out. But unhook batteries first.
I know a guy that bought one of these I work on it. Detroit 12.7 ddec4 with 10 direct and I think 2.79 rears. I tuned it he gets about 7.5 to 8.5...
