change solenoid valve first possible this is causing your issues.
this sensor is mainly for your ABS/TCS system to tell it trailer weight or truck weight also works for trans to be able to know load so it can...
need to check the mag switch, you should have power on one of the big posts and the other should go to the starter, one of the small post should...
does it start when you are putting a screwdriver thru the solenoid.
I would start with boost pressure sensor behind intake there is no other sensors on this truck to give u this code also check air to air system...
what engine is in this thing giving you a turbo fault no such sensors in those years maybe a boost sensor problem.
These are to different air circuits in truck aux. like susp dup, air horn, 4x4 fifth wheel slide. you can eliminate said solenoid but they feed...
Probably need to replace sensors also check dpf delta p pressure sensor most likely broken and needs to be replaced.
Leaking air maybe line maybe internal trans issue.
also need to check trans mounting and what kind of transmission they have. I dont know anyone else that has done it besides my ####### cuz it was...
It will work but need a lot of parts to be exhanged, Have done it once or twice. Also swaps between 23-24 to 15 -17 work as well have done a few...
there is a company called Mct sensor they build them for oem and aftermarket I’ve had very good luck with them and they r about 1/2 of the price...
the vent is plugged on driver side tank. volvo draws fuel from both tanks and returns to both tanks, you will find splitter valve behind trans...
Vocom II is the king vocom mini i have it its usefull but a ##### to set up and use constantly without good internet, the speed factor alone to me...
should be on the cover of the engine what year truck do you have i can prob post all info on here.
Depends if you have optional shifter with manual switch but it is only a patch and you are destroying gears inside trans
Check clutch life or possibly brake pedal sensor is out of adjustmet also it is possible clutch solenoid valve failing.
There is a way to fix it I would need to open trans and replace the damaged bearings and gears
If that failed it would let in truck air pressure I have ran these multiple times with straight connection with no issues
This trans has no ability to over pressurize anything it literally uses and exhaust air pressure from the truck so I call bs on overpressurizing...
